Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Fresh B13 ve swap plus diy header

+ Reply To Thread
Posts: 11-20 of 81
2013-06-12 21:40:46
#11
if you can make a header like
http://i1047.photobucket.com/albums/b472/happyharrysco1/N16%20Almera%20Project/Exhaust/CustomTriY2.jpg

and an intake something like
https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRb-O61zIIchGveQebQ9uvPkMNjlO6kDZSx9uJ2qsCzRMokJAuvBw

or

http://i250.photobucket.com/albums/gg267/NMoles/08072011616.jpg

you may be able to leave you day job for a while with these guys...
Last edited by sss4me on 2013-06-12 at 21-41-51.
2013-06-12 22:33:15
#12
Ok sounds good. My header is just about spot on with the link you posted and I should be able to make the intake manifold, I just need the fab parts. I'll start collecting parts and see if I can have a full custom manifold package before hitting the Dyno. I can take more pics of the header if ppl want to copy it. I'm working on a ve-t car right now so my na ve won't be going under the knife for a bit.
Last edited by se200 on 2013-06-12 at 22-36-02.
2013-06-12 22:50:54
#13
Originally Posted by se200
Ok sounds good. My header is just about spot on with the link you posted and I should be able to make the intake manifold, I just need the fab parts. I'll start collecting parts and see if I can have a full custom manifold package before hitting the Dyno. I can take more pics of the header if ppl want to copy it. I'm working on a ve-t car right now so my na ve won't be going under the knife for a bit.

Yeahuh! I'd love some details on what you used and what not on that header.
2013-06-13 00:52:54
#14
Curious what specs your building your into to. In order to really get a good length you'll need some curved and tapered runners.always like to see what everyone comes up with for custom manifolds..
2013-06-13 01:26:51
#15
Originally Posted by se200
What's the best place to get a set of n1 cams? I have not seen them up for sale on the forum in some time.


Gspec
2013-08-14 02:20:10
#16
Well went to the Dyno today. Car did very well. 202whp 160ftlbs.
Mods
Custom tri-y header
Modified intake manifold with q45 tb
3in exhaust
6 puck clutch 8lb flywheel
Nismotronic SA ecu

Car runs and pulls great all the way to 8k. I'm planning on hitting the track Friday. I'll post a pic and video if anyone cares. I just wanted to share my #s all this on stock 20ve cams and bottom end.
2013-08-14 02:32:49
#17
Real good stuff . Car is putting down sow real good power
2013-08-14 07:12:02
#18
Picture of intake?

8000rpm with stock valve springs?
2013-08-14 10:06:05
#19
triy header are cheap and give good , gains
2013-08-14 10:53:34
#20
Here are some pics. The car held power to 8k and that surprised me.








Last edited by se200 on 2013-08-14 at 10-57-08.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top