Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Intermittent RPM signal above 7000 rpm

+ Reply To Thread
Posts: 11-13 of 13
2013-05-17 16:32:33
#11
Originally Posted by Nicoxis
Changed the switch RPM signal cable from pin #2 to pin #3 and problem fixed!!


Looking back at my pinout, pin 2 shows ignition check , 3 is tach signal.
2013-05-17 17:03:09
#12
Originally Posted by ebinkerd
Originally Posted by Nicoxis
Changed the switch RPM signal cable from pin #2 to pin #3 and problem fixed!!


Looking back at my pinout, pin 2 shows ignition check , 3 is tach signal.


Are you sure?

2013-05-17 18:47:49
#13
Originally Posted by Nicoxis
Originally Posted by ebinkerd
Originally Posted by Nicoxis
Changed the switch RPM signal cable from pin #2 to pin #3 and problem fixed!!


Looking back at my pinout, pin 2 shows ignition check , 3 is tach signal.


Are you sure?



Ah, I didnt see you were using a b13 ecy. My reference was to a b14. Sorry for the confusion.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top