Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE w/ boltons - 186whp

+ Reply To Thread
Posts: 1-10 of 38
2013-03-04 22:25:48
#1
SR20VE w/ boltons - 186whp
Friend dynoed his n14 that is used for hillclimb racing. Basic and cheap setup for now.

186whp/206Nm, VVL at 4300rpm

Stock SR20VE
SR16VE cams +3, -5 (thanks payu)
SSAC header
2.25" exhaust
JWT filter w/ velocity stack
Nistune ECU dyno tuned





Car is waiting for Tri-Y header, 3" intake and 3" exhaust. Hope to see 200whp mark.
2013-03-04 22:28:56
#2
is that N1 cam?
2013-03-04 22:30:37
#3
No, regular SR16VE cams.
2013-03-05 03:02:22
#4
Good numbers. One of my previous set ups with SR16ve non-N1 cams and same cam gear settings made 190whp on 90 octane.

You may need n1 cams to hit the 200whp mark though...

Peace
2013-03-05 04:39:43
#5
Originally Posted by niZmo
Good numbers. One of my previous set ups with SR16ve non-N1 cams and same cam gear settings made 190whp on 90 octane.

You may need n1 cams to hit the 200whp mark though...

Peace


What's your mods? I noticed it said 13.6 in your signature.
2013-03-05 05:38:18
#6
Interesting, VVL at 4300. Mine hit 206 w/ VVL at 5100. I wonder if I should lower it a bit?
2013-03-05 06:19:20
#7
Originally Posted by Storm88000
Interesting, VVL at 4300. Mine hit 206 w/ VVL at 5100. I wonder if I should lower it a bit?


That has nothing to do with peak power.

Usually 54-5600rpm for N1s.
2013-03-05 06:26:20
#8
Nice dude. interesting cam settings
2013-03-05 08:00:57
#9
With intake, Tri-Y and 3" exhaust i believe it is possible to gain 14whp over 2.25" messy exhaust and old SSAC. Car also made 192whp but with not that good powerband.

Cam setting was recommended by Payu and worked best on the dyno.
Last edited by jagy on 2013-03-05 at 08-08-54.
2013-03-05 09:59:01
#10
Originally Posted by niZmo
Good numbers. One of my previous set ups with SR16ve non-N1 cams and same cam gear settings made 190whp on 90 octane.

You may need n1 cams to hit the 200whp mark though...

you should have kept it bredda that car could have pulled like a bitch and thanks for the effort with those goodies
peace
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top