Thread: My new itb setup

What cam its going to be used I see some modified rockers for VVL Killer Cams!!!

Very nice man. Love it. Cant wait to see what it does.

What's the length on this piece and is the inlet 58 or 58mm at the throttle plate?

I'm running 2 set. I used 184-c first. then moved to skunk2 pro3 B series. The power moved 800rpms to the right of the graph but the 50mm itbs restricked me. I have another profile from touring car, 14.3mm lift but had to mod the valve stem seals and guide to accomodate that!!

Cory, its a 58mm at the throttle plate, as you can see, the plates is mounted not to far from the end of the setup. a perfect 2.5 deg tapper per side. Total length is 175mm to head face.

Sweet, same dimensions as the runners on my latest intake manifold. That's a huge plate, good luck!

woooowwww nice setup, killer cams...

so the VVL system is already off?

This is some great stuff right here