Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Klassickricans's VE-T Build

+ Reply To Thread
Posts: 191-200 of 212
2013-06-30 03:24:20
#191
series 1.
2013-06-30 15:36:00
#192
looking good dom are u still taking it to arjay
2013-06-30 21:30:25
#193
Originally Posted by jus-det-luv
looking good dom are u still taking it to arjay


It will first get tuned locally.
Then when I get a chance togo down to GA.
I will let Arjay work his magic.
Last edited by klassickrican on 2013-07-02 at 01-39-58.
2013-07-03 04:46:41
#194
Label All the wires First!!!
got the coils done.its pretty simple 3 wires each coil
ground=Black
power=Black w/white stripe
colored=Signal goes do dedicated pin on the ecu

For AEM series2 the signal pins goes in this order
Coil cyl 1= pin#1
Coil cyl 2= pin#7
Coil cyl 3= Pin#5
Coil cyl 4= pin#25

I used the power and ground wire from coil 1,ran it across and soldered the other coil wires into them.


Separate the signal wire and run them to the proper pin location


Then clean it up and bolt it down.. there is some grind required to get the bolt holes lined up on coil 2 and coil 4.
Last edited by klassickrican on 2013-07-03 at 04-49-44.
2013-07-03 04:58:51
#195
Done yet?
2013-07-03 05:08:03
#196
Love this build.
2013-07-05 01:14:28
#197
There is a file waiting for you.
I hope to see you post a first start video tonight.
2013-08-01 20:06:16
#198
any updates?
2013-08-07 14:12:39
#199
On the back burner for now.
2013-08-07 15:20:45
#200
Originally Posted by klassickrican
On the back burner for now.


This saddens me. I shall patiently await future updates!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top