I feel what I am about to say pertains to this post, and the person I bought it from is now banned, so Jamie, I am wondering if you could share the specs and possibly some expected gains on this manifold you originally made that I have yet to install just for reference for everyone. I apologize if this was previously covered:
I know you said it was one of your first manifolds and that tuning is a must, which will be accomplished, but I have a few questions for you:
1. Must I remove the heater core/lines in order to install this?
2. What else needs to be intalled on the threaded ports aside from the pcv valve? (might be a noob question- I apologize)
@SR20GTi-R
Thank you for your help. I really hope I can get my car up there to you guys to maximize this setup when all is said and done. Good looks!
I know you said it was one of your first manifolds and that tuning is a must, which will be accomplished, but I have a few questions for you:
1. Must I remove the heater core/lines in order to install this?
2. What else needs to be intalled on the threaded ports aside from the pcv valve? (might be a noob question- I apologize)
@SR20GTi-R
Thank you for your help. I really hope I can get my car up there to you guys to maximize this setup when all is said and done. Good looks!