Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Going to dyno Wednesday. Any estimates on peak HP?

+ Reply To Thread
Posts: 1-10 of 145
2013-01-22 15:17:52
#1
Going to dyno Wednesday. Any estimates on peak HP?
92 Sentra SE-R with SR20VE swap. Motor runs strong, less than 66k on it, only use mobil 1 synthetis, Lucas gear oil etc.

Mods:
N1 cams
Supertech valve springs
JMR header
Warm air intake
N60 MAF
3" exhaust, no cat, to Magnaflow straight thru muffler
Tuned ECU
G-spec power steering pulley delete kit
MSD window switch (activates VVL at 5200 RPM)
4.44 final drive

I have since added:

Cold air intake
G-spec underdrive crank pulley
G-spec underdrive water pump pulley
JGY pressure plate/B15 disc
Fidanza lightweight flywheel


Update:
It was Mustang Dynamometer. I may have been one of the first imports there in a long time
The very first run was the best and the car started to over heat
The radiator fans aren't working and there was no air blowing over the engine

Here's the best number I got, very first run, VVL activation at 5200RPM:

MAX POWER: 195.7 HP @ 7834 RPM
MAX TORQUE: 133.9 @ 7108 RPM

So, yes, disappointed. It feels much faster than that.



**UPDATE**
Check page 3. I went to a real dynojet yesterday..
206hp &
148 ft lbs torque



Also posted video of the run
Last edited by Storm88000 on 2013-02-08 at 04-47-56.
2013-01-22 15:52:15
#2
140whp with vtak screaming to 9500rpm.
2013-01-22 15:56:35
#3
165-170whp, possibly more on a dynojet
2013-01-22 16:02:48
#4
208-whp 150ish-tq
2013-01-22 16:17:29
#5
if your not making 200, something is wrong.
2013-01-22 16:38:24
#6
Originally Posted by Keo
if your not making 200, something is wrong.



I should add.. this car already made 206hp - but before pullies, flywheel, cold air intake
2013-01-22 17:03:49
#7
If you are visiting the same dyno 210whp. Have you ever taken the car to the track?
2013-01-22 17:13:51
#8
Going to dyno Wednesday. Any estimates on peak HP?
212.6 bob
2013-01-22 17:39:18
#9
You pick up 5-7whp. If your at the same dyno and its corrected accurately I say 212whp ish
2013-01-22 17:39:32
#10
Originally Posted by P10FTW
If you are visiting the same dyno 210whp. Have you ever taken the car to the track?


I have not taken it to the drag strip but I have driven it on road courses and it was a lot of fun, except for the oversteer
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top