Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Maxima CAS

+ Reply To Thread
Posts: 51-60 of 81
2014-04-23 12:30:35
#51
On my right now. Ive put a megaskirt wheel triger into rhe cam sensor

And for rhe adjustment of the timing i made a custom bracket that bolt directly into the last cam cap i dont have any picture in stock but you can barely see it on this one
2014-04-23 13:54:34
#52
Originally Posted by jodrift
On my right now. Ive put a megaskirt wheel triger into rhe cam sensor

And for rhe adjustment of the timing i made a custom bracket that bolt directly into the last cam cap i dont have any picture in stock but you can barely see it on this one


I like the way you cheated...so you move the whole plastic trigger assy and redrilled holes in the base of the cas the aluminum base?
2014-04-23 15:47:41
#53
Originally Posted by Turbo
Thanx...Look at the 4th pic again the bolts are bottomed out to the slots cant turn it... its locked in place


Turbo SE-R - Ah, ok now I see what you're talking about. Perhaps you could cut the slot completely open on the side ear, and just use the top bolt to lock it down for adjustment?

Jodrift - Nice setup!
2014-04-23 17:06:32
#54
I redrill nothing. I just use the ve30 cas. Put all the s13sr20det cas internal and put my wheel triger

For the bracket im gonna try to take a picture soon on how i did it
2014-04-23 21:25:00
#55
Originally Posted by G20-Budo
Originally Posted by Turbo
Thanx...Look at the 4th pic again the bolts are bottomed out to the slots cant turn it... its locked in place


Turbo SE-R - Ah, ok now I see what you're talking about. Perhaps you could cut the slot completely open on the side ear, and just use the top bolt to lock it down for adjustment?

Jodrift - Nice setup!


I really dont need to... im running a standalone but if a was on a factory pcm I would modify the cas more, it just gets expensive for the cnc work. I can mill it myself on my buddys machine but just dont have the time.. then when you add it up it is just more feasible to buy the sr20ve 20v cas...I got like $175 between the cas and cnc work... 20v cas is $300 and fits with no mod's.
2014-04-23 21:27:00
#56
Originally Posted by jodrift
I redrill nothing. I just use the ve30 cas. Put all the s13sr20det cas internal and put my wheel triger

For the bracket im gonna try to take a picture soon on how i did it



My bad.. When I zoomed in it looked like the cas base looked machined.. I never opened a rwd cas so dont know how it looks inside..
2014-04-23 21:30:03
#57
Also there are two different cas that came in the ve30 I have a Mitsubishi cas and there is also a Hitachi cas.. one has a plastic cap and one has a metal cap.
Last edited by Turbo SE-R on 2014-04-23 at 21-31-39.
2014-04-24 17:57:50
#58
So if you need to adjust base timing how do you go about this?
2014-04-24 19:55:29
#59
Originally Posted by Jybfan04
So if you need to adjust base timing how do you go about this?


by turning the cas, or in the software
2014-04-25 02:34:07
#60
Originally Posted by unijabnx2000
Originally Posted by Jybfan04
So if you need to adjust base timing how do you go about this?


by turning the cas, or in the software


Im limited to just using software.. if the pickup is at a degree that I cant use then back to my cnc guy to do some more mods....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top