Thread: sr20ve itbs 50mm bmw

ok drawing is all done, it will have to have a head stud on one bolt. no room, and also two bolts for the throttle body wont have a thread in the adaptor will need a nut and bolt. other then that it will pick up all mounting holes. on both head and throttle body. and correct injection angle. everything should be right

ok the part is done. it still needs some work as it did not fit 100% but i was able to make it fit and work. i have raced with it now. needs to be tuned as it is a pig down low now. but up top it cracks. will install the n1s soon and get it tuned. but might need a rebuild before that did a cold compression test the other day and only had about 100psi across all of them but number 1 was down to about 80psi. so getting little sad. but hey it had done 110k before i put in buggy. but yeah looking for another sr20ve to rebuild in mean time.

Post some pics of the plate.

photos

Nice job what would be the price to get one or two of these plates

It still needs work but for $750au you have the file and make as many as you want it cost me over 1500 to have drawn

Wow... im going to have them made much cheaper locally...

Btw. nice bag

yeah i know it sucks over here it costs so much to get anything done. i wish i had access to a cheaper part. this one cost me 770 to machine up took about a day to make.

Why don't you go 16ve and smoke the 4age's? Or build the 2L for turbo. I imagine running a NA 2l in a class with 3.5's would not be too competitive?

I actually smoke a lot of them . Power to weight a lot are only making like 250hp