Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: 11.57sec n14 sr24ve

+ Reply To Thread
Posts: 21-30 of 42
2012-10-09 00:32:41
Nice work Derm. Wish you could bring it here to the states.

What trans are you using? Also, slick size?
2012-10-09 07:54:24
We currently use a p12 6 speed box
The slick is m&H 26x8.5x13
2012-10-09 17:18:27
Very nice. I'd be curious to see how the car would do with a 24.5'' on there. Regardless, car is moving out hard. Keep it up!
2012-10-09 20:03:02
My personal ipinion is that the 26' is holding us back at the top. What I say is that the gain at the bottum is not good for the lost at the top due to roll resistance!!!
2012-10-09 22:22:04
True. I would give a shot at 24.5's. We all have had good luck with 23's on this side of the pond.
2012-10-10 03:47:57
What was your 60' Time on that run?
2012-10-10 03:48:23
Or even better post up the Time slip
Last edited by 10.1sr20de-t on 2012-10-10 at 03-48-47.
2012-10-10 04:16:54
I've been wanting to see this run for so long! Great man! Spraying?
2012-10-10 04:22:06
26's are overkill for the setup

23's or 24.5's at the most. You can pull those same 60's with 23's and 24.5's and yeah you will have a much better top end
2012-10-10 04:30:30
i say some 24.5 will be able to get him out the hole hard and shorten up his gear ratios by the smaller tire.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top