Thread: spark plug for Na Ve

Read some thread on manifesto but it was 2008.
Im curently using ngk iridium got them used. If i will get new plugs i wanted to knnw what to get.
What plugs aru you using? Pls specify model number the gaping specs and the benefit u got.

Any advice would be great.im using factory ignition

Anyone?

for an n/a ve stick with the recommended ngk bkr6ey-11 for copper or bkr6eix-11 for iridium if you so desire
....phone....

Thanks.
Is gapping needed for this?
Whats diff bet bkr6ey-11 and bkr6e? I have the iridiums now and i think im experiencing misfire.mght be they are dead will check later

just get yourself NGK BKR6E-GP G-Power Platinum Plugs, 700p a set and you should be good, no Gapping Needed

the stock gap for the ve is 1.1mm, the -11 means they are pregapped to 1.1mm. this is a good PDF to let you know what the ngk part numbers mean >> http://www.ngksparkplugs.com/docs/tech/design_symbols_plugs.pdf

....phone....

Thanks guys

now ive found out my 02sensor is busted. My iridiums were coverd in black.im gona disable it.

I have the ix iridium which is 1.1mm but 5 heat range. Got bkr6e yesterday. I think i could still clean this and use them on trackdays.they performd well

BRKE6-N-11. Been working great for years now. Not the same plugs, of course. Pre-gapped.

The same thing sunny said. They work better than the copper plugs. I have never had an issue with them.