Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ve swap

+ Reply To Thread
Posts: 1-8 of 8
2012-07-30 17:00:08
#1
ve swap
Im new to all of this and want to get into the game , what engine harness will i need to use for a ve swap ? Take it easy on me , im just trying to get some pointers
2012-07-30 17:24:56
#2
There are several write ups for all of this on the old forum sr20forum old site, but to answer your question all you need is the one you have now with a window switch. If you have the 1.6L you need to extend some wiring to get them to the correct place if you have a 2.0L you will need 2 of the plugs wired into the DE (IACV plug and Temp). Make sure you keep the wiring from the VE or atleast get a VE with the wiring. You need the all important VVL plugs from it.

There are other recommendations for VE swaps, but it all depends on what you want to spend. Biggest is going to be ECU. You either need to get a JWT, NEMU, Calum, or NISTune unless you go stand alone. If you don't you need to wire install the DE injectors and keep the DE MAF.

Tons of other stuff to be concerned about, but it's pretty much all on the older board
2012-07-30 17:25:05
#3
Originally Posted by wizorm
Im new to all of this and want to get into the game , what engine harness will i need to use for a ve swap ? Take it easy on me , im just trying to get some pointers

Check the Manifesto. It is a Global Sticky at the top of every single section.

http://www.sr20-forum.com/global-stickies/57272-sr20-forum-manifesto.html

Look under: Engine Swap Information (SR20VE).

Also look under: Variable Valve Lift (and duration) (VVL) and SR20VE Engine Tech.

VE section of our How To's.

http://www.sr20-forum.com/ve/

VE Section in the Technical Library on the old forum.

NeoVVL Guides - SR20 Forum

Once you read all those pertinent threads, holler if you have any further questions. I won't answer them, because I am clueless. However, we have plenty of really smart cats that will answer them correctly.

Welcome to the forum.

Shawn B
2012-07-30 17:25:30
#4
ha ha shawn
2012-07-30 17:26:32
#5
Originally Posted by kcobabe
ha ha shawn

Great minds.

And see Kevin is one of the smart cats that knows answers. I just know where to find them.
2012-07-30 17:44:24
#6
Thanks !
2012-08-02 22:43:26
#7
Yup, it's all been done here. Many many answers
2012-08-02 22:53:23
#8
Its a pretty straight forward swap. What chassis do you have(B13/B14)? It is an SE-R?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top