Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 88mm on a budget!! (Not on budget anymore!!!) New Dyno!!

+ Reply To Thread
Posts: 161-170 of 241
2013-05-29 04:04:27
#161
Very nice. When's it making some passes down the strip?
2013-05-29 12:52:21
#162
well done for doing the comparison, so n1 vs 184 c is minimal?good numbers should be fast
Last edited by immigymp on 2013-05-29 at 12-54-14.
2013-05-29 13:11:49
#163
I only tested the 184-C Intake Cam with the N1 EX!!
The car should be in high 11's with a light jokey because with me driving wont make it jejeje
2013-05-29 16:58:16
#164
Lol
2013-05-30 08:38:09
#165
high 11's is dam fast, wish we could do that here with the same mods...our cars are slighly heavier not to mention you guys generally make 30+ horsepower more....
2013-05-30 13:41:06
#166
Originally Posted by immigymp
high 11's is dam fast, wish we could do that here with the same mods...our cars are slighly heavier not to mention you guys generally make 30+ horsepower more....


My mum works for QANTAS, I could fly Jamie over here for cheap and we'd all drop half a second down the 1/4 mile
You interested @SR20GTi-R ?
Please. Haha.
2013-08-06 16:24:39
#167
The end came to this short block!!!
Seems like stock rod didn like 9500 rev limiter for a long time!!
2013-08-06 16:32:01
#168
Damn, another upgrade is in order! Crank is ok, @Payu?
2013-08-06 16:33:00
#169
I don't know, with all the investment into getting pistons, boring the block head gasket and so on I am suprized you guys did not put a set of $330 Manley rods in for safety. Generally when a rod breaks the head can get messed up to. Anyway hope to see you guys running soon again.
Last edited by Andreas Miko on 2013-08-06 at 16-34-05.
2013-08-06 17:03:26
#170
My bad too much testing and money spending on those days!!! The other 88mm motor here making 260whp its on stock rods but its not street driven!!
Next block will have h beam rods and JE pistons!!
The crank didn't suffer!! Rod just broke I shut down the motor soon enough!!!!
Yes head just bent 4 valves and broke two rockers because of the piston hit!!
All parts are ordered!!
Last edited by Payu on 2013-08-06 at 17-08-24.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top