Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 88mm on a budget!! (Not on budget anymore!!!) New Dyno!!

+ Reply To Thread
Posts: 61-70 of 241
2012-08-15 22:02:49
#61
Good luck man
2012-08-15 22:17:59
#62
I'm,still looking for100oct gasoline I'm not to lucky
2012-08-16 00:02:04
#63
Well I did not fine the gas so I used 91 oct again but I only went from 232 to almost 235 but going to have to go on a few month ..so thiers more coming
2012-08-16 00:04:19
#64
e85 there?
2012-08-16 03:06:57
#65
Originally Posted by mercado
Well I did not fine the gas so I used 91 oct again but I only went from 232 to almost 235 but going to have to go on a few month ..so thiers more coming


So the car made from 232 to 235 whp in that range?nice numbers, how does she feel.
2012-08-16 22:07:52
#66
Originally Posted by mercado
Well I did not fine the gas so I used 91 oct again but I only went from 232 to almost 235 but going to have to go on a few month ..so thiers more coming


how was the graph in comparison.... wtq?
2012-08-16 22:36:17
#67
Not bad numbers at all. Nice
2012-09-12 14:45:43
#68
Payu, does it run already?
2012-09-14 16:08:15
#69
Yes but not so good results!!!
The pistons are not a good option if you are looking for maximum power on a 88MM Build!!!
1. They have too much piston to deck clearance (decrease compression)
2. Piston are too heavy (compared to a stock SR20VE piston)
3. Piston rings are old school (SR20VE are thinner less friction)

With a .76mm headgasket made same power as stock bore with SR16 pistons with the 1.2mm headgasket made less power!!!
I calculated the CR as is now and its around 11.5:1 wish its not ideal for maximum power on pump gas..
I will get a set of CP's done on 13:1 CR and Dyno after to see the difference..
But it will take a while!!
I am all about testing but my budget its limited!!
2012-09-15 10:02:44
#70
Good update. As not a lot people share results that are not happy with.

Thanks!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top