Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 88mm on a budget!! (Not on budget anymore!!!) New Dyno!!

+ Reply To Thread
Posts: 1-10 of 241
2012-07-09 18:38:08
#1
88mm on a budget!! (Not on budget anymore!!!) New Dyno!!
I will share a budget build from me!!!
Since I melted a SR16 piston from the a bad tank of gas LOL (My anxiety of not waiting to use all the bad gas or throw it away I knew was bad)
I didnt have a lot of money to trow away so decided to get a set of 1992 300ZX piston 1mm over since they are 87 std bore and take them to the machine shop and notched them using a SR16VE piston as reference. I spotted a Cometic 88.5mm bore .8mm thick for SR20DE made external Lubrication for the VVL and check all the rest of the parts of the motor...



Here its a picture of how the pistons looked installed!!!
The CR Should be 11.5-12.0 since the dome its smaller than SR16VE pistons and the piston doesnt reach the top of the deck by few thousand of an in..

I will post results after I dyno!!! hopefully It will make more power than STD bore SR16VE pistons!!
New pistons!!


New Dyno Results!!
Last edited by Payu on 2012-10-16 at 03-40-28.
2012-07-09 18:54:08
#2
nicely done now throw some smack at it and that thing will be a monster on a budget
2012-07-09 19:06:50
#3
Nice. Good luck. Curious to see how it plays out.
2012-07-09 19:12:14
#4
Uhh nice,looking forward how this one pans out.Props for always trying different things.
2012-07-09 19:26:24
#5
wow, thats a preddy innovative setup! talk about bang for the buck!

love the vvl oil feed relocay... afterall VVL hg options are so limited!

well played Payu... well played.

lets see some #'s!
2012-07-09 19:33:50
#6
I thought about 1mm oversized 300zx pistons before... glad you did it! You do a lot of nice power to money parts/builds. Keep it up.
2012-07-09 19:48:03
#7
- Where did you get the pistons? Price? I had been wanting to do a 88mm build for a while. Glad you are sharing.
Last edited by MR-4Door-SR20DET on 2012-07-09 at 19-49-04.
2012-07-09 19:49:14
#8
What is the part number for the oversized 300ZX pistons?

This will be topped off with a VE head?
Last edited by Kyle on 2012-07-09 at 19-50-04.
2012-07-09 19:54:03
#9
Originally Posted by Viprdude


This will be topped off with a VE head?


huh?
2012-07-09 19:57:33
#10
I know this is in the VVL section but I wanted clarification that a VE will be on the block.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top