Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: I've got this little ideling issue.

+ Reply To Thread
Posts: 1-7 of 7
2012-05-28 20:02:35
I've got this little ideling issue.
Alright anyways, i have been having a slight issue with my throttle position. I hooked up my scan tool and the TPS read 88.6% throttle wide open and 0% closed. The motor idled at 700-800 and when i threw it into gear it went to 1k rpms. I readjusted the TPS to where it read 100% wot and 9.8% closed. My question is what can i do to make the throttle read 0%when its closed? The motor idles at 1300rpms and when I throw it into gear it revs to 2k.
2012-05-28 20:16:05
Set it to .43 volts at throttle closed.

Then unplug it to set base idle with iacv.
2012-05-28 20:26:34
alright im going to give that a shot. thanks
2012-05-28 20:37:26
But now that I think about it, that isn't going to let me go wide open throttle and read 100%. And the car dies when I unplug the tps
Last edited by pan_duh on 2012-05-28 at 21-03-12.
2012-05-28 21:31:38
That means your base idle isn't set right.
2012-05-28 21:34:12
If you go higher then that at idle then then your not going to be in the right place in the map... the tps may be bad...
2012-05-28 23:40:01
I just tried two tps and it did the same thing
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top