Thread: Road Race 2.0 all motor setup

couldnt find something lighter? like one of those datsun rwd cars

or is the weight issue is such that it wont allow?

peace

The car was so clean i couldnt pass on it The weight limit is 1100kg (2425lbs) with driver. This car stripped for race is easily withen the limit. You are right though, an S13 would have been much better but the price is easily 3 times this car over hear as we never got the S13/14/15 here locally..

ok, i see

once you can get the weight down, no probs

keep ups posted. would be nice to see the build of the chassis too or maybe the members ride section would be more appropriate

peace

wow that cefiro looks like new!!!

those came out here with a carbd rb24 lol

Now you know why i didnt pass on this car, it was really like new! And it does have the RB24 carb motor!!!!!

This is going to be a VERY interesting build.

Sub'd.

PS- Welcome to the forum! Some folks that haven't responded yet have quite a bit of experience with VE work. Stick around for a little while and you'll be surprised at some of the work that has been done.

nice..goodluck with the project

Subd

yes as in over do. Go progressively with them.



No I ment over cook. The 20ve ex ports dont look like much, but they are very easy to get flowing quite well. Especially with oversized valves. The general shape is better than it looks. For NA I would recommend +2 on the intake and +1 on the ex.

However when going 90mm overbore it is easy as the intake becomes deshouded bringing the balance back. IMo one of the reason the 90mm set ups do soo well.

s13 wouldnt be much better. weight is around the same give or take a bee's dick. And everything from the s13 suspension and drive line wise bolts in. The extra cost of an s13 wouldnt be worth it

Also s15 gearbox would be worth looking into due to 5 gears to get to 1:1 and not 4