Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Ve fpr adaptor?

+ Reply To Thread
Posts: 1-9 of 9
2012-02-05 14:04:48
#1
Ve fpr adaptor?
I heard this is needed to run a fpr other then the ve fpr? What is this u all speak of?
2012-02-05 14:33:03
#2
idk where you heard that but its not needed.
2012-02-05 16:14:19
#3
Use a Nismo FPR that fits in place of the VE one.

If you want to use an external one then yes, you need an adapter or you can chop the VE one and gut the internals and use that as an adapter (not pretty).
2012-02-06 03:14:30
#4
Can I use a de fpr?
2012-02-06 04:32:12
#5
Originally Posted by 200sx
Can I use a de fpr?


Sure, you might need to bend it a bit. DE and VE FPR's are the same though, so only replace it if your VE one is broken.
2012-02-06 12:52:41
#6
do you need to replace the ve fpr if you have a walboro 255?
2012-02-06 13:28:46
#7
I have a modded fpr but it somehow it leaks between the two bolts....that's when I was told I need a adaptor...!?!?! I think its just the fpr
2012-02-06 13:57:24
#8
Gspec has them.
2012-02-06 14:00:47
#9
Originally Posted by b12sr20ve
do you need to replace the ve fpr if you have a walboro 255?


Nope, but Walbro does increase the fuel pressure slightly (1-5psi). Nothing a tune can't fix.

Originally Posted by 200sx
I have a modded fpr but it somehow it leaks between the two bolts....that's when I was told I need a adaptor...!?!?! I think its just the fpr


Bad Oring most likely. In this case you can try using a DE one. Or upgrade to a better unit while your at it (Nismo/Aeromotive)
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top