Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: just found out VVL is not working on stock p11 ECU???

+ Reply To Thread
Posts: 21-30 of 30
2012-05-26 21:44:28
#21
or buy an 8969 and control the switchover =)
2012-05-26 22:08:29
#22
Originally Posted by Andreas
If you want to know if it is working conect both VVL selenoids to postive on the battery and to a switch that is grounded and switch them on while you are driving a 6200 RPMS and see if they are working.


If you wan to see if the ECU is working just get a light bulb and connect it to the wireharness for the VVL selenoids run the wire into the car and drive it down the street. You will then know if the ECU is working properly


best advice...i was going to say this...
2012-05-27 20:23:49
#23
even easier, unplug the solenoids and see if it still makes that sound at 6200.

and lol @ dan
2012-05-28 09:53:31
#24
Originally Posted by lynchfourtwenty
even easier, unplug the solenoids and see if it still makes that sound at 6200.

and lol @ dan


i have unpluuged is the exhaust since i cannot hear the intake...

well I will go to my mech tom, i hope eveerything is fine will have checkd with a tester

I hop the intake pop is really at 4500

thank you all
2012-06-01 16:44:45
#25
Louie will be in Pampanga this coming Sunday, give him a call, he may be able to sort out some of your issues

0922-868-9520
2012-06-03 11:04:31
#26
thaNKs tevs!
2012-06-03 14:43:08
#27
Louie usually goes to Pampanga Area almost every other weekend, he is willing to sort out your issues with the B14, how was the Clark Trackday, did you run?

Tevs
2012-06-04 05:49:36
#28
trackday will be june 17...ill probably let him test my solenoids
2012-06-04 15:44:41
#29
wish i could join you guys, give Louie a call asap, talked to Nkid last night, he's hitting it up for sure.

Just waiting for a few things, Header, clutch, 02 sensor, knock sensor and a 16VE ecu
2013-04-23 17:22:01
#30
I dont want to start a new thread, but can anyone confirm that stock VE ECU intake cam switch point is 4500rpm? Thanks
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top