Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: sr20ve ====((((((((

+ Reply To Thread
Posts: 11-19 of 19
2012-01-05 16:24:31
#11
Originally Posted by Becerro
come on give him a chance, our english is not perfect, but we make a big effort reading here all the info that we need for our VE´s, know jorge is having a real headache with this problem in his luccino.

Jorge como te dije checa todos los conectores de los arneses tanto de MAF, TPS, O2, y todas las tierras que te encuentres por cierto sabes donde aterrizaron la tierras de tu ecu? antes estaban en el multiple de admision sabes donde estan ahora para que las verifiques, yo creo por ahi algo anda mal, por cierto conque estas activando el VVL? ahi tambien puede haber bronca



gracias por comentar hermano.

anoche quedo solucionado el problema, te platico

unas de las patitas de los chips estaba haciendo contacto en la tapa metálica
de la ecu, era mínimo el contacto que hacia con la cubierta, y al colocar la ecu en su base esta se protegía porque se ponía en corto,

para solucionar el problema elaboramos un especia de empaque de cartón en cada una de las tapas, hecho esto hicimos pruebas ya en su base y funciono
todo al 100.
2012-01-05 16:25:57
#12
Thanks for everything, the problem has been solved !!!!
2012-01-05 16:34:16
#13
what was the problem?
2012-01-05 16:40:15
#14
Originally Posted by lynchfourtwenty
what was the problem?



one of the legs of the chips was doing on the top metallic contact of the ecu, the contact was minimal to the deck and put the ECU in its base is protected because it is put in short,
2012-01-05 16:44:24
#15
interesting, thanks
2012-01-05 17:05:27
#16
Originally Posted by jorge_gsr
one of the legs of the chips was doing on the top metallic contact of the ecu, the contact was minimal to the deck and put the ECU in its base is protected because it is put in short,


this happened to me...ecu wasnt bolted down all the way...after a launch or two would vibrat loose one of the chips in the ecu and run bad,smelled like gas wouldnt rev smoothly...and check engine light on,with ignition on fans startted running..

ive ran into this before.
2012-01-05 18:58:48
#17
Originally Posted by PEDRONX2k
this happened to me...ecu wasnt bolted down all the way...after a launch or two would vibrat loose one of the chips in the ecu and run bad,smelled like gas wouldnt rev smoothly...and check engine light on,with ignition on fans startted running..

ive ran into this before.


yes, the fans are on to give key. you could have helped me from the beginning. but only hast cast me shit for my English.
2012-01-05 22:34:53
#18
Eso porque tu inglés si está muy mal jaja ahora lo que te sugiero es poner a punto esa computadora, métele un wideband para ver como anda la mezcla

Saludos Jorge, que bueno que ya quedó
2012-01-05 23:42:15
#19
Originally Posted by kevo
Eso porque tu inglés si está muy mal jaja ahora lo que te sugiero es poner a punto esa computadora, métele un wideband para ver como anda la mezcla

Saludos Jorge, que bueno que ya quedó


y no me has escuchado hablarlo jaajajja xD. si en eso andamos kevo, para que jale duro como el tuyo.


saludos.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top