Dynoed tonight
Ok well we just recently put together a white b13 with a shaved bay with a stock ve. So before we put cams and other bolt on's and head down for a marsh tune we decided to get a baseline. So the car is a stock ve with a ssac header , lightweight flywheel , and a custom cold air with a velocity stack. First pull we did was on motor the car made 166hp and was a little rich. So we decided to spray it I used the zex chart as a base I loaded in the 55hp jets and the car made 236hp then I did a little bit of a jet separation while keeping the same nitrous jet and the car mad a final number of 247hp & 225ft lbs with a air fuel of 11.9. All these runs where done on a dynojet.