Thread: what maf is good for the ve

i picked up a 96 200sx ser ecu

its a stock ecu? im sure it is.. if so use the maf that goes with the ecu.

you cannot just wire up any maf without a ecu that you can tune.

Times two.

ok yeah i am aware of that i also picked up nistune board when it comes time to tune it, so i should be a able to use a different maf if i want correct?

ok, you have to use a 95 200sx OR 95 G20 ecu with a type 4 nistune board, you should of had this all installed from where ever you bought the board from since they know exactly what to do.. when i took an ecu into a local place to have the shit soldered i had to show the guy Exactly what to do.. lol

and yes you could then use whatever maf you want.

just drive with what you got an when it comes time to put the nistune ecu in switch to a n60 for simplicity.

ok cool, yeah i sent the guy over at nistune the numbers on my board and he told me which one to get, it was the type 4 board. yeah my tuner has been dealing with them for a while so im sure he knows how to do it. is there any big difference between the n60 and e60? or is it just the years? thanks again

honestly the e60's suppose to be a tad newer.. its really up to you, i dont think you will see a difference.

VE MAF is nice. I like it most for N/A setup.

ok thanks, i appreciate all your time and help.

Again get a E60 MAF. It has a higher HP rating than the DE and above all, it looks nicer attached to a popcharger.