Thread: Installed MSD 6AL-2 with HVC II Coil

Installed recently, I'm using Iridium Plugs #6 Grade opened the gap to .48 I beleive it was .39-.41 from the box. I had to increase the fuel pressure a bit as I noticed the car was running lean. The car was tuned before I installed the coil and was running on 12.8-13.1 range at wot. This last Sunday I went to a Nissan Meet and Dyno Day, and the car was running at 13.7-14.1 range o_0. The only change from the time it got tuned to this other dyno session(show only, no tunning involved), was the HVC coil. I know that the OEM ignition system is very good and better than most aftermarket ones, but just want to hear some comments about this one

go with copper plugs,

cant use precious metal spark plugs when u have MSD. ^^ what he said

So what brand would you guys recomend? Didn't know i had to use copper ones

Regular BKR6E-11 maybe?

Same combination was worse than stock for me.

the e-11 should be fine

Took the IX's out. Just tried the BKR6e-11, opened the Gap to .51 runs good no problems. Should I open the Gap a bit more??? just want to know if anyone has tried it before with good results of course. Thanks for all the replies