Thread: torqe specs for ve-T build

ok im waiting on my head, block and piston rings to get back from the machine shop.
do I follow the torque specs from usdm chilton manual specs to button everthing back up?
is the jdm DET,VE manual any different torque spec wise?

arp studs main/head torque specs are-
1st sequence= 45lbs / 2nd sequence= 65lbs
thanks guys!

VE-T setup nistuned
sr16ve block,wp,pu tube,oil pump
sr20ve head,nismo740's,supertech S/R,vet HG
balanced 8CW crank,DET girdle,Crower rods,
CP ve turbo pistons 9.0.1 cr/swain coated
Calico acl race bearings- 5 hole main/ 19mm rod/thrust
GTIR-mani/GT2871r AR.86 for break-in period (2k miles) in the daily D..
E.L.mani/6262 when its put in the drag car.

follow the same sequence as in you manual just torque to whatever ARP says...and you dont have to loosen and retorque or do the 90* thing either

just remember, center out, and also let it sit overnight and check the studs, took mine a couple days to settle and not need any extra

got it thanks!