Thread: Clutch Pedal Issue..

Hey Guys, so i Found out what the hell was wrong with my Clutch about a couple months i post here.. Turns out my eBAY (JUNK) disc was Shot after 2k miles of usage. Springs were coming out of it..

Any way, did the Swap and now have a ClutchMaster stg 4 in it. Feels Good. Only thing is:

Issue: Clutch feels Spongy and squeeks After about 5 mintues of usage.

Heres the catch. Clutch felt like that before i changed the clutch job.. What i did notice, AND FORGOT TO DO, was Grease the Input Shaft on the Trans, where the throwout bearing goes.. i saw it was Smooth with no grease on it and figured it would be alright..

Does anyone Know if this might be the cause of my Pedal Feel??? or is there something i can Lube to feel SMOOTH Clutch Pedal Again..???

clutch cable strected?

My pedal squeaks a lot too as I have a stg 4 competition clutch. I know I greased the input shaft and it still squeaks so I wouldn't worry about it too much unless you hear it coming from the bell housing itself. I've had a squeaky pedal for a while and its really just annoying more than anything else. Its weird tho because some days its quiet and others its noisy but I haven't had a real problem.

I dont really care about squeaky noise, just want my pedal to feel normal.. LOL, i just through the squeak noise in, cuz maybe someones had a similar issue and wanted to me the most detailed on what the problem is..

Don't think its a stretched cable.. Clutch has always shifted perfectly with no issues until my VVL swap and eBay disc swap..

you need to get the box off an grease the bit the bearing moves on, also grease the clips and the shifter rod, you can pull it up and work grease down by moving it up and down, this made my cable setup feel like a hydro setup

Just realize he said he didn't do that.

Get Mikos clutch cable bracket maybe? I bet that arm is flexing...http://www.sr20-forum.com/naturally-aspirated/11706-tranny-brackets-sale.html

Thats what i was thinking it needed.. Grease on the input shaft of the Transmission.. I didn't grease it when i changed out my new clutch. And it looked dry.. I guess i'll have to pull it down again..

i just swapped out the engine but i didnt grease tht bearing when i cleaned that whole housing with some engine degreaser its all super clean and dry damn so that needs to be greased?