Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: need help finding info on running a SR16 ecu in a B13

+ Reply To Thread
Posts: 1-5 of 5
2011-08-29 17:26:14
need help finding info on running a SR16 ecu in a B13
I have a DE block im putting a VE head on. I have the VE dist., MAF, wiring harness, and a SR16 ecu. I want to know what all is involved with putting the ecu in my car, and which harness i should run. The VE harness i have was modified to run in a B14 so will it work in my B13? It has the OBDI single long ecu plug mated to a ve harness. Are the white auxillary? plugs under the dash different? Or how can i make my B13 harness work? Do I just splice in the VE dist, MAF, inj. sub harness w/ IACV? Anything else needced to be spliced in like any other sensors im missing? Or can i use my B13 sensors (knock, water temp sensors, etc)
-do i need to source all ve sensors and spliced the corresponding connectors in the B13 harness?

-is there anything alse i need? or anything i missed to make this work?
Basically i want to know which is the easier route. Or shgould i just get my ecu chipped by JWT or someone else?
2011-08-29 17:43:05
the sr16 ecu will plug up to the de or the ve harness. so if the ve harness can work, i dont see any need not to use it.

you know you will need a piggyback or some 370cc injectors to be safe with that ecu running a sr20ve, right?

Last edited by niZmo on 2011-08-29 at 17-46-21.
2011-08-29 19:06:05
just use the de ecu bud, save your self a headache.
2011-08-29 19:54:55
My buddy did it. I feel as though,its not right for the car.

2011-08-31 13:34:10
have 370's. I hooked this set-up up in my freinds b14, and it ran good.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top