Thread: need help finding info on running a SR16 ecu in a B13

I have a DE block im putting a VE head on. I have the VE dist., MAF, wiring harness, and a SR16 ecu. I want to know what all is involved with putting the ecu in my car, and which harness i should run. The VE harness i have was modified to run in a B14 so will it work in my B13? It has the OBDI single long ecu plug mated to a ve harness. Are the white auxillary? plugs under the dash different? Or how can i make my B13 harness work? Do I just splice in the VE dist, MAF, inj. sub harness w/ IACV? Anything else needced to be spliced in like any other sensors im missing? Or can i use my B13 sensors (knock, water temp sensors, etc)
-do i need to source all ve sensors and spliced the corresponding connectors in the B13 harness?

-is there anything alse i need? or anything i missed to make this work?
Basically i want to know which is the easier route. Or shgould i just get my ecu chipped by JWT or someone else?

the sr16 ecu will plug up to the de or the ve harness. so if the ve harness can work, i dont see any need not to use it.

you know you will need a piggyback or some 370cc injectors to be safe with that ecu running a sr20ve, right?

peace

just use the de ecu bud, save your self a headache.

My buddy did it. I feel as though,its not right for the car.

Stratton.

have 370's. I hooked this set-up up in my freinds b14, and it ran good.