Thread: sr20ve swap, need a speedo meter signaal interface , cause only 6900 rpm now

Hi,

here Peter from Netherlands

i do a sr20vvl swap into a nissan sunny.
Its for the race, so i dont need a dashboard.
Now i have no signal from gearbox speed to ecu.
Thats why i just have 6900 rpm. I have already a ecu from Bill , Greece.
The ecu really need a digitall signall that the car is moving....
I still have my old speedo meter, and behind that speedo meter is a print board, with 18 pins connector.
What i need is some help, for the anlog signal from the speed sensor, into a digitall signal for the ecu.
A kind off speedo interface.
who can help me whith a wirring diagram from the print board behind the speedo meter, so that i can connect the speedo signal from sensor, and get a good signal to ecu?
The numbers on the print board are AK0001 990323 09 , i think its from a primera vvl, from japan.
Just under the 18 pins connector , is also a number con1 k29441vb200.

I really hope someone can help me here.
Iff you have some info, you can email me directly also
petermanders(add)home.nl

thanks a lott guys...