Thread: Help in Bearings

Hello,

ACL Bearing: (for the sr20ve) STD

ACL 5M2964H
ACL 5M2964HX

ACL 5M2975H (5 oil holes)


Please some help on getting the correct ones, What are the diferences in all this ones and witch one will be the best one for the sr20ve.

If any other better race Brand out there please let me know.

Thanks.

If you havent cut the crank run standard and youll be good to go.

Ive ran nothing but acls for the last two years or so.

Stratton.

Yeah run the standard acl race bearings. The non-coated ones. Ive been running them as well for the last 3 years and never any bearing problems. They are great bearings.

hello Stratton,

But About this 3 diferent codes I have mention. witch one is the correct or if the 3 ones are correct witch one is the best one.

Thanks.

I usually buy my acl's off ebay. I cant recall the part numbers but just ask for the standard size non coated. The one you want is the top one you listed. The HX bearing is the standard bearing w/ a .001" extra oil clearance I believe.

thanks for the info but my question is:

This will fit the sr20ve crank: ACL 5M2975H (5 oil holes)????

Thanks.

yes the 5 hole will work fine with the ve as long as the block is a ve. The ve blocks have a groove on the block for extra oiling purposes.