Thread: RWD VVL, using fwd dizzy as CAS

It's a machined and modded S13 CAS using fwd parts. I had it wrong when I said it was a fwd dizzy machined down.

ok that makes it a little more clear what exactly did he have to do??and dose the rwd cas bolt right up

Good question I never asked. He did tell me it came out too about the same as buying a new 20v cas tho.

Could you get me thr specs wanna keep all my options open plus it would be benificial to anyone looking to do a rwd ve

if any body needs a cas and coil packs and wiring, im willing to sell mine off my VET?

Won't be anytime soon I'm in a different state and don't see him too often. When I get back I'll ask him.

10psigti clear your PMs to make some room.

Found it.

There are only a few of them in existence. You're not likely going to find one for sale, but you get the idea.

http://www.sr20-forum.com/members-rides/21908-my-sfwd-sentra.html

Thanks for the pic ben ill make something like this with some sheetmetal hopefully i can make it a little smaller for more clearance

Don't be scared to gut the distributor of it's internal coil, and chop off that tall high voltage stack.

(The most important thing when buying a FWD distributor to fit a 50mm CAS disc is to make sure it has an internal coil. The internal coil one is what you want.)

Im gonna use the 50mm AEM disc in the VE Dizzy , Cutting off things doesnt sound healthy if one doesnt know what to do lol, i have room so ill just leave the dizzy cover n stuff, ill be running AEM Pencil coils.