Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Stock VE with bolt-ons dyno

+ Reply To Thread
Posts: 1-10 of 10
2011-07-05 17:30:40
#1
Stock VE with bolt-ons dyno
Nothing impressive or new, just sharing...

Stock SR20VE
SSAC header
70mm exhaust
Calum ECU with base Calum .bin
Fidanza flywheel
3" intake with JWT pop
3" N15 GTi MAF

VVL @ 4800rpm

206 PS / 215 Nm

Last edited by jagy on 2011-07-05 at 17-46-55.
2011-07-05 19:25:30
#2
and that is in whp?
2011-07-05 20:20:06
#3
should be about 173-175 im guessing
2011-07-06 17:13:17
#4
Around 180whp (13% losses).
2011-07-06 17:26:04
#5
good numbers but you may can pick up a few hp/tq with tuning and maybe a better maf.

then again, dynometers differ so you could be right were you should be

thats about 177whp, 137tq

peace
Last edited by niZmo on 2011-07-06 at 17-33-43.
2011-07-06 18:46:09
#6
Its not mine, its race car that i did swap for.

They are happy with power, it needs LSD and short geared transmission now. But yeah, there is more potential with tuning. MAF is same design as N60/VE/Z32 MAF, so its about right.
2011-07-06 18:48:24
#7
Still on stock cams I see. I would be happy with 180whp on stock cams. Slap in some N1's with a retune and pick up about 15-20whp.
2011-07-07 22:12:24
#8
yup^
2011-07-13 23:11:11
#9
Nice numbers
2011-07-14 06:19:56
#10
or retard that exhaust cam a little and lets put a number on how much gains it gives....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top