Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: kelford/ cam setting help please

+ Reply To Thread
Posts: 1-10 of 20
2011-06-19 15:59:04
#1
kelford/ cam setting help please
Hey guys so heres the story.. i previously had kelords in my motor set at 5,0 i took them out and put regualr stock ve cams in and ran them for a while now i jus recently bought a set of kelfords the other day and i went to install them at 5,0 again but i had no compression so i went back and put them at 0,0 and now the car runs but im wondering why isnt it running at 5,0 anymore? i am 99.99999% sure i installed them right, motor was at top dead center, i even installed one cam at a time to make sure nothing went wrong so i dunno some help would be great thanks guys
2011-06-19 16:01:02
#2
what version ?

stratton.
2011-06-19 16:21:41
#3
they sed the new version so im guessing v2s since you said your the only one in the us with v3s i dunno how i would go about checking
2011-06-19 17:01:56
#4
also my spec sheet and the spec sheet on the kelford website are different.
2011-06-19 17:31:14
#5
Post ur spec sheet ? You may have v3s, kelford from my understanding no longer carries the v2s.

Also why havent you asked/ contacted kelford.

Stratton.
2011-06-19 17:44:02
#6
I tried calling but no answer, but i sent them an email to see what they have to say. I dont have anything to upload the spec-sheet, can i call you later today or tomorrow to see if our spec-sheets match? Or do you have a number for kelford that i can use? Thank you for your help.

pm me your number if anything thanks
Last edited by Daves_sr on 2011-06-19 at 18-48-28.
2011-06-19 20:12:40
#7
They are really good at getting back to people if you can send Kevin at kelford an email
2011-06-19 21:37:27
#8
Originally Posted by cory
They are really good at getting back to people if you can send Kevin at kelford an email


i sent an email i dont know if it is directly towards him do you have his direct email?
2011-06-21 14:17:12
#9
Sorry I have been super busy and had to separate from the outside world for a little while.

I will give you a call later today.
2011-06-21 23:37:15
#10
Cool
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top