Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: how much can i rev?

+ Reply To Thread
Posts: 1-6 of 6
2011-05-18 21:38:47
#1
how much can i rev?
i just change the cams on my sr20ve to n1 also did the retainers and springs i got BC. how high can i safely rev the engine up to?
2011-05-18 21:49:44
#2
its not gonna make peak power past 78ish or so depending on your tune, you can go to 9k, but 9k is stretching the power band.

8500 is a good point to start shifting at after second gear.

stratton.
2011-05-18 21:53:07
#3
thanks for the info
2011-05-19 03:06:07
#4
I've taken the BC springs to 9k on n1 and 10k on kelford cams. The springs will be alright but you'll need a dyno to see where its worth reving to
2011-05-19 23:04:51
#5
8500 is good enough..some times i take mines to 9k..
2011-05-20 16:33:55
#6
if you drag then 9000 rpm for 1st to 2nd

then about 8500 or so for other shifts but it depends on your power band

other than that for a spirited drive - 8000 to 8500 rpm

peace
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top