Thread: how much can i rev?

i just change the cams on my sr20ve to n1 also did the retainers and springs i got BC. how high can i safely rev the engine up to?

its not gonna make peak power past 78ish or so depending on your tune, you can go to 9k, but 9k is stretching the power band.

8500 is a good point to start shifting at after second gear.

stratton.

thanks for the info

I've taken the BC springs to 9k on n1 and 10k on kelford cams. The springs will be alright but you'll need a dyno to see where its worth reving to

8500 is good enough..some times i take mines to 9k..

if you drag then 9000 rpm for 1st to 2nd

then about 8500 or so for other shifts but it depends on your power band

other than that for a spirited drive - 8000 to 8500 rpm

peace