Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: oil smelling like gas..?? please help

+ Reply To Thread
Posts: 1-10 of 36
2011-03-25 01:46:18
#1
oil smelling like gas..?? please help
hey guys ived searched the forum and havent really gotten a answer my oil has been smelling like gas idk what it could be i bought the motor a few weeks ago from jdm engine depot and i picked out one of the cleanest ones it has power and runs fine but i noticed that it was running rich and afterfireing (it still after fires) timing is set to 15 degrees and im useing a JWT ve ecu and stock ve injectors my f/p is a lil over 35psi and im useing the oem f/p regulator the oil i use is "M1 10-30 synt" when i first started it up it was smokeing like a chimini and after like 10 min it stoped smoking its my DD and i never seen it smoke like that ever again ne ways ne ideas on y im gettin this smell in my oil im praying that its not the piston rings ....i apreciate your help
2011-03-25 10:22:09
#2
Check your PCV.
2011-03-25 11:40:14
#3
pcv or you are running excessivly rich causing gas to mix with the oil
2011-03-25 14:10:48
#4
^^ agree with both previous post also check compression maybe a low compression is a sign of damaged piston rings causing the excess of fuel to mix with oil... but thats the worst case scenario check first pcv and your AFR... GOOD LUCK!
2011-03-25 18:56:44
#5
thanks guys im gonna check it out the pcv is fairly easy to change i think i got a new one some place thats probably y my intake manifold is full of oil =(
2011-03-25 19:22:39
#6
Sounds like fuel washed walls.
2011-03-26 16:34:57
#7
Originally Posted by wnwright
Sounds like fuel washed walls.


this frightens me.... -_-
2011-03-26 16:53:17
#8
I'm still trying to figure out why people suggest PCV. It would be a miracle for fuel to work its way up the intake track against gravity and air flow... And then to go against the flow of the PCV air flow (which on a VE would vary between pulling vacuum on the valve cover to static flow)...
2011-03-27 20:13:26
#9
hummm do you think a thicker oil would help keep the fuel from getting down there im using 10-30 right now.. and i would expect her to burn oil if its spilling gas around the rings or maybe not because of oils nature +_+ ... this smell is not a good sing to mee
2011-03-27 20:20:04
#10
You are definitely getting excess fuel by the rings, do you have a wideband? Check your injectors to make sure one isn't stuck open and check your cts.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top