Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: AFRs Q?

+ Reply To Thread
Posts: 1-10 of 18
2011-03-17 23:31:41
#1
AFRs Q?
So, because I just installed my Wideband im curious to know what my AFRs should look like? At idle and while on/off the pedal. thanx
2011-03-17 23:45:44
#2
14.7@ idle and cruising and low 13s to high 12s under wot
2011-03-17 23:49:19
#3
thank you

MmmmmmBAAAAAAA
2011-03-18 01:43:16
#4
Originally Posted by cory
14.7@ idle and cruising and low 13s to high 12s under wot


2011-03-18 15:24:02
#5
14.7 at idle is so so, depends how much timing you are running.

I found maximum torque and power at an almost flat to low 13. (built motor)

On a stock port and intake motor, look for mid to high 12's for maximum torque and power for the same timing figures.
2011-03-18 15:51:56
#6
I've found mid 12s to make best power on high cr set ups, and stock internal motors seemed to like low 13s
2011-03-18 16:27:24
#7
I idle at 15.0, 11.3-11.7 under boost and bounces back from 14.5-15.3 when cruising at very light throttle.
2011-03-18 16:30:54
#8
Hobbs, pretty sure this question was pertaining to just a VE. Could be wrong though...
2011-03-18 17:15:38
#9
Originally Posted by Cliff
Hobbs, pretty sure this question was pertaining to just a VE. Could be wrong though...


No, pretty sure I'm just retarded. Hit the 'new posts' button and didnt look at the section. Sorry!
2011-03-18 17:23:41
#10
Originally Posted by cory
I've found mid 12s to make best power on high cr set ups, and stock internal motors seemed to like low 13s


Basically keep on making it richer until you start loosing power?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top