Thread: lookin for thoughts and feed back

i was thinkin about doing a ve head on a det block with det pistons and stock 2.0ve cams and replacing the stock valves,springs,and retainers not sure if eagle rods will fit the stock pistons but if they do ill put new rods on as well gonna be running it with a turbonetics t3/t4 stainless steel turbomani a turbonetics evolution wastegate and an adjustable apexi blow off valve and i have a greddy emanage blue for engine management any thoughts on that?

ditch the emanage and get a calum or nistune realtime ecu

Eagle rods will fit the stock pistons.

DET rods are good for 450 WHP all day everyday.

Sounds like a good setup. Make sure to get 740cc side feed injs. They are good for 520 WHP at 3 bar and 600 WHP at 4 bar.

With a good T3/T4 turbo you will make 390-410 WHP at 15 PSI and 460-480 WHP at 20 PSI.

thanx guyz believe it or not i got the emanage for 100 dollars juss missing a few things but i'll check out the calum and the nistune any chance any1 know sum1 selling a det block or ve cams my ve only came with 1 cam