Thread: Help Vvl?????

going ve in my 1996 200sx ser can i get some steps on wiring and ecu

1. cut your OEM harness in 4 parts.
2. buy a AEM.
3. Drill a hole in the head.
4. Then try looking at the sticky or search and learn why u search.

There is probably more basic information on the old forum:

NeoVVL Guides - SR20 Forum

This is where we documented the first swaps and saved all the basic information. For more up to date information, the Dash (this forum) is superior because many of the more knowledgeable folks have moved over here.

You can get great information from this community, but you have to do your homework. There is a low threshold for spoonfeeding.

Very well put

what size drill bit again?

3" for sure. Dyno proven to be less restictive than 2.5"!

Ok, so I just cut my harness in 4 pieces and drilled the hole. Why won't my car start now?

They forgot to specify.. Must cut harness with chain saw...

I used a sawzall on mine.

thanks alot the swaps complete ass hole thanks to you dont think i could of done it with out you <<<