Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Timming on SR20VE with 20V Cams

+ Reply To Thread
Posts: 1-8 of 8
2010-11-17 01:33:05
#1
Timming on SR20VE with 20V Cams
I just installed some 20V cams on my stock sr20ve motor. I wanted to know what timming should i be running? Is it 5 degs or less or more? Please advice is needed...
2010-11-17 02:03:05
#2
.............................
Originally Posted by Speedracer
I just installed some 20V cams on my stock sr20ve motor. I wanted to know what timming should i be running? Is it 5 degs or less or more? Please advice is needed...



Your not helping anyone with the lack of info. If ur using a DE ecu then run it @ 15 deg like the ecu wants. If it's a VE ecu then run it at what the VE ecu is suppose to be.
2010-11-17 15:40:49
#3
Originally Posted by BlueRB240
Your not helping anyone with the lack of info. If ur using a DE ecu then run it @ 15 deg like the ecu wants. If it's a VE ecu then run it at what the VE ecu is suppose to be.


Thanks man....yes i am using the VE ecu and maf....

Also do anyone know where is the stock engagement of the cams in the 20V?
2010-11-18 01:57:55
#4
bump
2010-11-18 02:09:51
#5
Tune it
2010-11-21 14:27:30
#6
VE ECU is 10 degrees
2010-11-22 00:33:45
#7
Originally Posted by gtswrx
VE ECU is 10 degrees


SO what your saying is using the 20v cams on the sr20ve engine with ve ecu i should run 10 degs???
2010-11-22 00:35:29
#8
Originally Posted by Speedracer
SO what your saying is using the 20v cams on the sr20ve engine with ve ecu i should run 10 degs???


Yes, that is what he is saying.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top