Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Mazworx N/A Header......

+ Reply To Thread
Posts: 41-50 of 153
2010-09-15 23:13:03
#41
Originally Posted by cory
Guys our headers are low because our motors sit so low to the ground. Unless we have the collector before the exhaust goes under the oil pan it will be low. Its just life for us nissan guys


X2



Originally Posted by vqman
is that something they can do?? i think they would have a corner on the market if they could develop something like that.


Sure, get a 4-2-1 header. Otherwise that's the nature of the 4-1.
2010-09-15 23:13:14
#42
Originally Posted by cory
Its just life for us nissan guys
Naw dawg, just rock square tubing.
2010-09-15 23:13:24
#43
Originally Posted by shingouki1
if you think the asp is low then you would cringe if you header was this low...


HOLY SHIT that's low! the ASP budget only sits about 1/2" lower than the crossmember but that is unrealistically low. I bet you scrape even at stock height.
2010-09-15 23:14:27
#44
low is not an option here in LA, especially when my car already sits pretty low.
2010-09-15 23:18:02
#45
You couldn't pay me to put that header on my car. wow
2010-09-15 23:19:58
#46
that is the protech header if you guys are wondering what it is.
2010-09-15 23:21:58
#47
can't get over how low that is...
2010-09-15 23:22:21
#48
Originally Posted by lynchfourtwenty
all 3 ssac headers i've installed have all lined up perfectly, the ports were larger then the ports an the gasket.. however i had to redrill a few holes on my header to make it fit cause the stud holes were off a tad so it wouldnt go on.. my friends that i put on i couldnt get the bottom middle nut on cause it would hit the header an not go all the way down.. the 3rd one i did fit perefectly with no mods needed..

you get what you pay for an i guess bein cheap an buyin a cheapy header you got to expect to mod it to fit..

i'd much much much rather have a mazworx header.. i was thinkin bout gettin a protech one, but now i think my mind is changing to the mazworx one hehe.

GOOD STUFF!


Originally Posted by javcrodgz
You couldn't pay me to put that header on my car. wow


And you couldnt pay me to take mine off, 4-1 baby.
2010-09-15 23:24:43
#49
Originally Posted by 5speed
Sure, get a 4-2-1 header. Otherwise that's the nature of the 4-1.


he was just saying how you might be able to put the collector before the exhaust goes under the car, but someone else said you wouldn't have enough length on the primaries.. ah well..
2010-09-15 23:26:22
#50
Originally Posted by 1sentra-se-r
And you couldnt pay me to take mine off, 4-1 baby.


It would be nice to have a header engineered for the car, not just the motor.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top