Thread: cam gears

Since I'm putting n1 cams in I was thinking of cam gears,is it worth doing it?If so wat u recommend.Thanks

There are a few options.
JWT, CS, GSpec, etc...

If you need a set just lmk check link below

http://www.sr20-forum.com/forced-induction/34179-fs-jwt-adjustable-cam-gears.html

Get the Tomei cam gears. The JWT, custom gears are a huge pain in the ass to try and adjust on the dyno. HK$ one will work too you just have to change the bolts on them.

I got a set of the tomeis. Lmk if you interested Ill sell them

yea i was looking at the gspec one,but is it worth doing or im good w stock

Cory if ur trying to sell your Tomei cam gears post them on Zilvia since RWD can use them too. Mine HK$ gears sold in 1hr.

If ur going to tune the car and try and make more hp then u will need cam gears. If u don't give a crap then stock is fine. If u get Tomei/HKS gears life will be whole lot easier and cheaper adjusting cam gears on the dyno. The JWT/Custom steels you have to take the cam tensioner out to adjust. Try reaching behind your head and doing that after a hard pull and tell me how fun it is.

dang no one answered your question. Is it worth doing depends on where you want your power. Cam gears typically just MOVE your power/torque as appose to adding.

I thought I did?