Thread: Question about Center Lobe for N1 cams

Nissan cam measurements
http://www.sr20-forum.com/vvl/40827-ve-factory-nissan-cam-specs.html

Thanks blo0d! Did you work that out from your own measurements or was it referenced in that book?

Im going to de gree it to 104/110 like cory said or is thier some difrent numbers

SR16VE N1
Intake cam
Low Intake Duration: 220
Low Intake Lift: 8.4
Low Intake Center Angle: 110

Low Lobe Center Angle: 116
Low Overlap: 0

High Intake Duration: 288
High Intake Lift: 12.0
High Intake Center Angle: 104

Exhaust cam
Low Exhaust Duration: 244
Low Exhaust Lift: 7.95
Low Exhaust Center Angle:122

High Exhaust Duration: 288
High Exhaust Lift: 11.9
High Exhaust Center Angle:110

As per: VE cam specs - SR20 Forum

The intake cam centreline is ATDC and exhaust is BTDC. If you degree yours to the settings you quoted then make sure you engage the high cam.

High cam how

Lock the engagement latch in place with a screw driver or something before rotating the crank so the cam lobe contacts the middle rocker arm and holds it itself.

Ohhh ok

Got that from Charles

Cory what do you think