Thread: Lets talk oil temps on VE

Circuit Sports Angled Oil Filter Adapter : Nissan SR20
GReddy Oil Cooler Adaptor W/Thermostat 12401123

I think the greddy has the oil temp sensor port too but might want to email them and find out. ohh yeah BAM!.

Greg at Gspec has these too:

http://www.gspec.com/p-10950-oil-filter-mount-remote.aspx

http://www.gspec.com/p-10949-oil-filter-block-off.aspx

gtswrx the Gspec one has no thermostat in it.

Those ports on the Gspec don't look like they are 1/8PT to adapt for a temp or pressure sensor either

The greddy unit has the ports for the oil temp sensor, It's an adapter that u have to buy it's on the same page. I don't know anyone who runs the circuit sport tho, but a few friends run the greddy unit.

I pulled out the GDB oil cooler kit and it didn't have the ports for the sensors with it which blows so talked with Greddy and they couldn't confirm if it was available separately but they have the 240sx sandwich plate in stock which does come with at least 1 of those bungs with the holes in the middle that I can put my temp sensor in so I am going to order that up soon and then I'll just need the lines to get everything going.

Greddy USA, HKS are both clueless when it comes to the products they have lol. GREDDY 1/8pt GAUGE ADAPTOR for Oil Cooler Thermostat thats the fitting for the oil temp probe.

Ya I showed Greddy that link and they weren't aware of that item which is odd so it appears the kit I am going to be ordering should have it but we will see. Will be really nice to get this kit with the thermostat and I can plus screw my temp sensor in, other adapters I was looking at were much more expensive and all I would need is the lines after that so maybe $100 to get those so not bad at all.

Oh and your user profile link is broken in your sig

tap the oil pan.

ive had mine there for years wich goes toa vdo oil temp gauge.

my oil temps on the road never get above 210 and this is a turbo motor making a fair ammount of boost. granted its street driven but i havent had any probs yet.

stratton.

Just seems like so much work to tap the pan, maybe I'm lazy