Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Apexi Neo v2

+ Reply To Thread
Posts: 1-5 of 5
2010-03-09 21:49:34
#1
Apexi Neo v2
Since I pretty much gave up on finding a Greddy MSS, I'm wondering if any of u guys are running the new Apexi NEO. Since the NEO incorporates both SAFC and VAFC, I thought it would be convenient. My question is, can the new NEO activate the cams individually? thanks!
2010-03-10 01:17:57
#2
Originally Posted by wearurpjs
Since I pretty much gave up on finding a Greddy MSS, I'm wondering if any of u guys are running the new Apexi NEO. Since the NEO incorporates both SAFC and VAFC, I thought it would be convenient. My question is, can the new NEO activate the cams individually? thanks!


don't think so remember VAFC mean VTEC AIR FUEL CONTROL so its made for VTEC wich is activated both cams at the same RPM. So you cant activate them separately.
2010-03-10 01:28:41
#3
Yeah the Neo can only activate both cams at one RPM.

But the best thing is that you can tune your car with it and activate the cams. If you have stock cams just activate them 5 thats were i have mine pulls hard
2010-03-10 01:41:45
#4
I've been thinking of running my neo and msd rpm switch to run the solenoid but haven't had a chance to sit down and put some thoughts on how to wire it up ... I have in mind to run a relay set up to activate one of the cams ... Basically use the signal from neo to activate relay to activate and put power to solenoid
2010-03-10 04:35:39
#5
Thanks for the replies, but I thought the NEO with the colored screen just came out. I thought it was the updated one. Ya, ill most likely go with this set-up since I wont be changing my cams and its convenient. Only good side of having a dual switch is to smooth out the power band right? or is it only with aftermarket cams.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top