Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: ve clutch suggestions

+ Reply To Thread
Posts: 11-17 of 17
2010-03-06 03:57:50
JWT pp, B15 disc, and tranny saver bracket FTW!!!!!!

Are you sensing any kind of trend here?????
2010-03-06 04:48:37

yes theres a trend.. because it works well...
2010-03-06 07:34:47
Originally Posted by cortrim1
Jwt pp and B15 disc

Same here. Had ACT HD SS PP and worked very well but was hard on the clutch cable and slight overkill for a 190-200whp VE. Had the ACT HD SS clutch disc but it puked a spring when I had the full bolt on DE in it. JWT PP & B15 disc works perfect for my setup and has a near stock feel to it but can hold the power and then some. Very reliable.
2010-03-06 08:48:58
thanx for the replies people, to the dude that said there is one of these threads everyday i searched and didnt get the answer i wanted so i asked.. thanks for everyone who chimed in, gonna have to grab a flywheel seperate then
2010-03-06 08:50:15
its all about the search criteria..
2010-03-06 19:13:40
Originally Posted by blusteelsr20
Had the ACT HD SS clutch disc but it puked a spring when I had the full bolt on DE in it.

That's what my ACT did. Actually, it was three (3) springs. When my tranny died and we inspected the ACT, those springs were just barely being held in place. The little tabs or pieces of metal (very technical I know) that hold the springs were cracking, and there were cracks radiating out from the...uh...cutouts where the springs were located.

My mechanic (10+ years, dead honest) showed me the damage/deterioration and would not reinstall it, nor would I have let him.
2010-03-06 19:53:58
Originally Posted by joelosr20
+10 same as me no issues with almost same setup

Same setup
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top