Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: VE wont start

+ Reply To Thread
Posts: 41-50 of 53
2010-02-05 08:37:35
#41
ya i shift at 7500ish when racing, the rest of the time 7k
2010-02-05 08:42:14
#42
After I get the car fully registered, 3'' exhaust, and dyno'd on current set-up, I'm going to install the supertech valve springs and n1's. I wanna be part of that "9k RPM crew" lol
2010-02-08 00:17:29
#43
WHOA! Just test drove the car right now. All I can say is WHOA! All it's running is on a base bin Nistune programmed for VE inj and n60 maf. Greddy mss activating vvl at 4800 intake, 5200 exhaust.

Cant wait to go to the dyno
2010-02-08 16:49:39
#44
Welcome back into the club big dawg!!!!!
LerkZone
2010-02-08 19:17:22
#45
thanks cuz!
2014-04-09 21:15:54
#46
Im having the same issue and cant figure it out, i installed a vvl in my b13 and it cranks without struggle, has fuel and spark, the spark plug wires are in correct order, if i give it some gas it will start to turn on and when its on it idles fine no misfire but as soon as i give it gas it turns off,
2014-04-09 21:17:26
#47
Im having the same issue and cant figure it out, i installed a vvl in my b13 and it cranks without struggle, has fuel and spark, the spark plug wires are in correct order, if i give it some gas it will start to turn on and when its on it idles fine no misfire but as soon as i give it gas it turns off, i regrounded the maf, the tps sensor has a crack inbetween the sensor and plug but the 3 prongs are intact
2014-04-09 22:26:57
#48
This thread was 4yrs old..... Start your own. List what you have setup wise and what car it's in. Post some pics and let us know what you need corrected. Good luck man.
2014-04-09 22:36:02
#49
I commented here so i dont clutter the forum with the same issue
2014-04-10 14:49:43
#50
Are your fuels lines backwards?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top