Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: What we've been up to(new numbers posted on page 5)

+ Reply To Thread
Posts: 161-170 of 688
2010-04-08 02:30:57
Originally Posted by Payu
Go for it buddy and good luck anyway you are one of the few that try every setup at the strip with good results...

Thats right. Keep us up.
2010-04-08 06:40:48
we demand vids or ban.

2010-04-08 07:15:40
Tony you make me a proud previous owner ;-) keep up the great work!!!!!!
2010-04-08 11:14:07
Originally Posted by STRATTON
we demand vids or ban.


i got some...just need to upload
2010-04-08 13:41:50
Originally Posted by b14_vzr
i got some...just need to upload

do it now!!!!

2010-04-08 13:56:04
Originally Posted by b14_vzr
i got some...just need to upload

Yea man.Post them up.Can't wait to see the car in action and hear the exhaust tone.
2010-04-08 14:14:56
Originally Posted by sr20venosfreak
Yea man.Post them up.Can't wait to see the car in action and hear the exhaust tone.


Originally Posted by Andreas
03-25-2006, 09:00 PM Today was a great day, I made more HP than I thought I would. The car made 204.64 WHP and 143 ft lb torqye. The torque is a little low but I hope to fix that in the next few days with some advanced timing.

Now consider this. I have not done anything to the car. I did not set the TPS I just put it on the TB. The timing was at 12 degrees. Fuel Presure was at 41 PSI.

The best part is I let off at 7,800 RPMs and the power was still climing. Please note I am trying to be on the safe side so I am not going to rev the engine untill I get some valve springs and retainers.

From what I see I think with the timing set at 15 degrees FP set at 37 PSI and with the TPS set at 48 with a 8300 RPM run I see 210-215 WHP with no problem.

I also have not put in my cam gears which I will be doing on Sun. They will be st +4 -4. Anyway 215-220 will be no problem when tuned.

I also now know 250- 260 WHP with 200 lb ft torque will be easily attained with the 2.3L motor.

This was well worth the wait.

^Dre was dead on 4 years ago about this setup lol. I didn't know enough about the VE then to make any real moves.
2010-04-08 14:59:48
Yup. He was actually real conservative. Considering that was a stroker motor.

But yeah the car sounds the exact same just a lot faster.
2010-04-08 15:27:30
2.3L 92mm x 86mm will make more WHP wnd less torque 260 WHP and 185 Ft Lb torque, like Cory's motor.

2.3L 90mm x 91mm will make less WHP and more torque. 250 WHP and 200 Ft Lb torque like my motor.

my motor has a little advatage so it jight make a little more WHP because it is 2.313 vs 2.285 for Cory.
2010-04-08 16:15:13
Looks like the track is a go. Weather wasnt looking to good this Sunday, but....

Rock Falls, Wisconsin (54764) Conditions & Forecast : Weather Underground
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top