Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Another clutch blown! missing dowell pins!

+ Reply To Thread
Posts: 51-56 of 56
2011-08-24 15:25:56
Originally Posted by illestdaniel
Best clutch i've ever used is a father & son clutch made by a local moms and pops shop 1800 lb on pressure plate six puck with usa made pucks and springs still holding up on my brother gti-r that put down 380 hp at the dyno and its real soft... also on my cousins avenir set up and my friends ve softer than a act hd with street strip and it doesn't chatter a lot like i thought it would

he also makes special request clutches... 300 out the door
2011-08-24 16:06:29
so u paid 300 for that clutch
2011-08-24 20:43:31
Originally Posted by liljay781
so u paid 300 for that clutch

i paid 250 because of the shop i work at and he included titanium rivets but 300 covers 6 puck with pucks made in usa and what ever pressure you want on pressure plate the only china part he uses is the pressure plate shell everything else is made in the usa and i believe if you wear out the pucks he rebuilds disk for 60 or 80 would have to confirm that
2011-08-24 20:45:30
Originally Posted by liljay781
so u paid 300 for that clutch

i had a act on my car didnt last long with all the trips to the track this one was cheaper and has lasted twice as long
2011-08-24 22:02:37
Originally Posted by src
One more kit arrived! This is a best SR20 FWD clutch I ever tried. Exedy not worth its cost.

I had a clutch like this back in the day. It was a half/half. one side was that and the other i forget what it was but took a long time to brake in.
2011-08-24 23:50:09
Originally Posted by cory
Couple firends have told me that its just a heat treated oem.. I guess to know for sure you'd have to ask jwt

IDK bout that... both the ones i've installed looked to have wider / beefier fingers then the exedy units i've installed which had pretty skinny / thin fingers..

i have a stock setup in the g20 an the jwt pp / b15 disc in the se-r an i can tell you the clutch in the se-r is WAY stiffer and seems to grab harder
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top