Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: sr16ve build with ITB's

+ Reply To Thread
Posts: 31-40 of 73
2010-01-12 12:59:49
#31
Originally Posted by cory
This is just so sweet because I've been thinking about a de stroked big bore ve for a long time but id never be able to do it. Its so hard to give up that stroke and extra power, buts its cool as hell in the end. So excited to see the curve on this thing.. I almost wonder if n1 cams might work even better with this set up, being as there profile matches the strok as where the 184c are designed for a 86mm..


I have a set of N1's so we will test this.



2010-01-12 13:08:55
#32
I have had enough...

Where's my damn carbon fiber 20v center cover.
2010-01-12 13:42:44
#33
Thats Purrrdeee
awaiting dyno chart(s)
2010-01-12 16:15:52
#34
pure sex nothing more nothing less...

your gona have to NWS any videos you get of that thing!
2010-01-12 17:55:38
#35
Immense, everything I'd ever wan't in an engine.
2010-01-15 00:53:00
#36
Originally Posted by derm
sr16ve crank
std rods arp bolts
90mm cp pistons 12.5 to 1
Darton sleeves
90mm cometic 0.7mm gasket
custom flywheel
custom main pulley
supertech rev kit
flowed head
Kelford 184-C cams
50mm csl M3 itbs
custom 50mm velocity stacks
custom adapter plate
68lb siemans injector
arp head studs
20V valve cover
bosch 910 fuel pump
aeromotive fuel regulator
an10 braded fuel piping
summit fuel cell
custom breather system
mitshibisi coil pack
perfect power blue fire cdi module
dicktator 60-2 fuel management
custom Telemetry system
plx500 wideband controller

I think thats about it


Nice setup Derm.

I don't know if you intentionally left them out out, but I spotted the nitrous foggers.
2010-01-15 01:02:43
#37
Originally Posted by derm
I have a set of N1's so we will test this.





i think i jus jizzed in my pants
2010-01-15 20:25:34
#38
Originally Posted by 5speed
Nice setup Derm.

I don't know if you intentionally left them out out, but I spotted the nitrous foggers.


ITs a very expensive way of closing holes in my itb's for now.

Sorry bud. My bad!! its something for the future!!
2010-01-15 20:36:14
#39
Not to be a pest. But I can't stop thinkin about this I'm excited to see these curves.. u plan on dynoing anytime soon?
2010-01-15 20:38:21
#40
It's cool.

It's one of my old habits from the street racing days, always on the look out for "cheaters".
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top