Thread: Spark plug wires & 20V VC

Those guys who are running the 20V VC what are you using for spark plug wires?

Use the same wires just need to cut away the bottom part of the seati of the top of the spark plug wire

Will take pictures and post it later

^^Yep. Works great. The NGK blue wires have more adjustability with the seal in the spark plug well as you can move the seat higher on the boot. You still may have to trim the bottom section of the seat where it seals to make full contact with the spark plug.

Anybody running the coils???

you cant run the coils without a ecu that drive 4 (or 2 in wasted) coils.

people with just the valvecover obviously arent gonna be able to rock the coils - but with a s13 sr computer - and then the distributor is not used (the cas part inside still is).

Add a Q45 or s13 ignitor into the mix - and some 20v/s15 coils and you've got yourself a cop setup for your ve.

This is all assuming you're running a b13 computer with a daughterboard and a trigger device for the vvl.

Yeah I have a stand alone So my question is being asked so I can find out what car uses coils that fit our motors/20 V vc??

s15 silvia coils.

or denso pencils.

The 20V valve cover is almost identical to the others when it comes to the coil situation. This thread should be of help to you: http://www.sr20-forum.com/tuning/26028-cop-coil-plug-pencil-coils-will-fit-fwd-engine.html

the 20v engine uses the same coils as a s15... so they fit